Slip Ring Asssemblies
IEC Corporation
Since 1955
The TB 2.0 to 4.0 model is designed to fit over shafts from 1 to 4 inches. Standard models available with bore sizes of 2 or 4
inches and 4, 8, or 12 rings. If your application requires a nonstandard bore size, we will build the next larger size and install a
reducing sleeve with the required bore size for a nominal charge. Please consult our staff for information concerning rotational
speeds.
Copyright IEC Corporation 1955-2010
Standard Specifications
Operating Current
Operating Voltage
Electrical Noise
Leakage Resistance
Temperature Range
Encasement
Ring Material
Brush Springs
Brush Contacts
Insulation
Sealing
Leads
7.5 amps per ring
1,000 VRMS
5µV, P-P, BW=10Hz-10kHZ at 8.5 mA, 500rpm
10,000 Megaohms (min)
-30°F to 175°F
Anodized Aluminum
Solid coin silver
Beryllium copper
Two 80% silver-20% graphite contacts per ring
Delrin
O-rings
20 AWG TFE covered wire, 3 ft long
Current
Voltage
Bandwidth
Temperature
Wire
Wire leads
Mounting
Subsea
Options
Up to 30 amps per ring
Up to 5,000 VDC
DC to 250 MHz
-45°F to 350°F
Coax, twisted pair, thermocouple, to customer specs.
Longer leads than 3 ft. standard lengths
To customer specifications
Wet-mateable connectors
Sample Applications Include:
Coil Tube Reels
Food Processing
Packaging Machines
Bottling and Beverage Applications
Measurement and Sorting Equipment
Signal Transfer
Defense Applications
Strain and Torque Readings
Phone (512) 836-0547
Fax (512) 834-1082
TBNP 6.0 - 8.0 Datasheet