Quality Slip Rings Since 1955512-836-0547
High Temperature -TBVS-HT-.375
The HT (High Temperature) style units evolved through custom development with customer partners in the petroleum industry. These unique products are designed for the harshest of environments, they are able to withstand
the high pressure, high rpm, and extreme temperature typically associated with downhole tooling applications.
These units are able to run in synthetic oil. Each unit is manufactured with an anodized aluminum encasement. Our standard unit is manufactured with 2 foot leads on each end.
The TBVS-HT-.375 is a 6 ring unit designed to fit on a small shaft of .375 inches. If your application requires a
smaller bore size, we can install a reducing sleeve with the required bore size for a nominal charge.
Standard Specifications
Operating Current
3.5 amps per ring
Operating Voltage
500 VAC
Electrical Noise
5μV, P-P, BW=10Hz-10kHZ at 8.5 mA, 500rpm
Leakage Resistance
10,000 MΩ (min)
Temperature Range
-30°F to 392°F
Encasement
Anodized aluminumRing Material
Solid coin silver
Brush Springs
Beryllium copper
Brush Contacts
Two 80% silver-20% graphite contacts per ring
Insulation
Peek
Leads
24 AWG TFE covered wire, 2 ft long
Options
Wire leads
Longer leads than 2 ft. standard lengths
Mounting
To customer specifications
Sample Applications Include:
Signal Transfer
Measurement and Sorting Equipment
Stress and Torque Readings
Bottling and Beverage Machines
Downhole Tools
